Home>Equipment list>communication device>Command and dispatch equipment>128-Channel PCM Integrated Multiplexing Equipment
细节展示放大镜特效

128-Channel PCM Integrated Multiplexing Equipment

  • No:BL-OMUX128A4FE4E1
  • Quantity:

      Recommend


    Product Overview:

    Confederate Communications 128roadMulti-serviceTelephone Optical Terminals are developed by the company.PCMPoint-to-point optical transmission equipment developed on the basis of VLSI for optical fiber transmission. Based on modular design, provide128Road telephone,4road10M/100MFast Ethernet Interface (Line Speed)100M) Or4road10/100/1000MGigabit Ethernet Interface (Line Speed)1000M),4The Ethernet interface is a switching port and can be supported.VLANPartitioning can be set to logical isolation. Just so so2Path Extension Business Interfaces such asRS232/RS485/RS422Asynchronous data, switching signal, Ethernet signal (bandwidth)2M) Equal transmission channel, application is very flexible. It has perfect alarm function, stable and reliable operation, low power consumption, high integration and small size.

    4UFrame insertion card,provide128Optical Terminals for Road Telephone,AdditionalE1Plug-in card,4Route speed100Mor1000MEthernet,ConsoleNetwork management,canSNMPNetwork management

    Functional features:

    Ø The telephone optical terminal is based on the integrated circuit of independent intellectual property rights.

    Ø Plug-in card design facilitates the replacement of problematic voice paths and avoids integral equipment.1The whole machine needs to be replaced when there is a problem with the road telephone.

    Ø It is convenient to expand the capacity, increase the card, maintain and replace the card.

    Ø The equipment is4U 19Inch frame, with a glossy panel and4individual16Composition of road telephone function board and smooth port board4Lu Baimeo/GigE Vision+An Optical Interface+2Extended business interfaces such as

    RS232/RS485/RS422Asynchronous data, switching signals, etc. Each function board can be inserted into the network management board.16roadFXO/FXSBoard,8roadEM2/4Wire board,E1Interface board,8Road serial data board;

    Ø Maximum configuration of this device256Road, if the user wants to60On the basis of road expansion, only the telephone board card can be added.

    Ø 128Road voice, supporting caller display function and anti-polarity billing function;

    Ø Supporting the mutual playback function of each site;

    Ø Voice Port SupportFXOMouth andFXSMouth,FXOThe port is connected with the SPC switch.FXSThe port is connected to the user's telephone.

    Ø Optional4Network Ethernet interface is switching port, it can also be partitioned.VLAN

    Ø Ethernet Interface Rate is 100 Mbp or Gigabit Optional, Full Duplex/Semi-duplex adaptive;

    Ø It has the function of viewing and displaying the working state of remote equipment at the end.

    Ø Reachable transmission distance without relay2~120Km;

    Ø A variety of power supply options:AC220VDC-48V/DC24VEtc.

    Ø DC-48V/DC24VThe power supply has the function of automatic polarity detection, and there is no need to distinguish the positive and negative poles when it is installed.

    Ø Telephone interface with lightning protection, radar protectionGB/T17626.5(IEC61000-4-5) Short circuit current wave8/20μsOpen-circuit peak output voltage6KVStandards.

    Technical parameters:

    u Optical Fiber Part

    Multimode Optical Fiber:

    50/125um or62.5/125um

    Maximum transmission distance5Km@ 62.5/125umSingle-mode optical fiber, attenuation(3dbm/km )

    Wavelength: 820nm

    Transmitting power: -12dBm (Min) ~ -9dBm (Max)

    Receiving sensitivity: -28dBm (Min)

    Link budget: 16dBm

    single mode fiber:

    8/125um9/125um

    Maximum transmission distance40Km(Customization for larger distances)

    Transmission distance: 40KM@9/125um Single-mode optical fiber, attenuation(0.35dbm/km )
    Wavelength: 1310nm

    Transmitting power: -9dBm (Min) ~-8dBm (Max)

    Receiving sensitivity: -27dBm (Min)

    Link budget: 18dBm

    u E1Interface

    equipmentE1Interfaces are consistentG.703proposal

    speed Rate: n*64Kbps±50ppm

    code Type: HDB3

    Resistance Resistance: Nonequilibrium formula75W/Equilibrium Formula120W(Non-balanced coaxial interface adapter, adapted75-2/3Coaxial cable)

    Jitter characteristics: satisfyG.742G.823proposal

    Input allowable attenuation:0~6dBm

    u Ethernet interface(10/100/1000M

    speed Rate: 10/100/1000MSelf-adaptive, all-round/Semi-duplex fully adaptive

    Association Discussion: SupportIEEE 802.3IEEE 802.1Q(VLAN)

    MACAddress table: Learnable4096individualMACaddress

    Physical interface: RJ45Seat, SupportAuto-MDIX(Crossing)/Direct Line Adaptation

    u FXSTelephone Port

    Ring voltage: 75V

    Ring frequency: 25Hz

    Two-wire input impedance:600Ω(Off hook)

    return Loss: 40 dB

    u FXOSwitch interface

    Ring detection voltage:35V

    Ring detection frequency:17Hz-60Hz

    Two-wire input impedance:600Ω(take off machine)

    return Loss: 40 dB

    u Power demand

    System power supply: AC180V ~ 260VDC –48VDC +24V

    Work Consumption: ≤10W

    u work environment

    Working temperature: -10℃ ~50℃

    Working humidity: 5% ~ 95% (No condensation)

    Storage temperature: -40 ℃~ 80℃

    Storage humidity: 5%~ 95% (No condensation)