Coaxial Network Elevator Floor Display(LF9100YT)
Coaxial network elevator floor display superimposes elevator running status characters such as elevator up, down and stop on the monitoring video screen. It is built-in compatible with Haikang, Dahua, Samsung, Tiandiweiye, Yushi, etc.20Many network camera brand protocols, users can choose.
Working principle:
The elevator floor signal is transmitted to the floor display host through two sets of signal collectors of the detector, and the video signal output by the detector and the camera is superimposed into a new image and text video signal, which is sent to the monitor.
Connection diagram:
Product function:
1. Transmission of network camera and network building display signal through coaxial line.
2. The elevator stops and the operation data are displayed on the surveillance video screen.
3. Supporting maximum100MBPSTransmission rate self-adaptive function.
4. Elevator name length and name can be set freely.
5. Elevator up and down arrow indication, double reset.
6. SupportWEBSoftware upgrade, free access to the latest high-definition floor display software.
7. Compatible with Haikang, Dahua, Tiandi Weiye and other network brand cameras.
8. Photoelectric detection building display and magnetic induction building display mainframe are universal.
Specification parameters:
Supported standards and protocols |
IEEE 802.3、IEEE 802.1X、TCP/IP、NAT、 G.9960、G.9961。 |
LANInterface |
2individual10/100Mself-adaptionRJ45port(Auto MDI/MDIX) |
Network Transfer Module |
1individualBNCPort;1Two-core ports(Enhanced type). |
Data Acquisition Interface |
1Four plug-in four-core ports |
Network Media |
100Base-TX:5Category aboveUTP |
No less thanSYV75-5Coaxial Cables (Copper Conductors) Specifications(Enhanced) |
|
No less thanRVS2*1.0Twisted pair cable (copper conductor) specification(Enhanced) |
|
LEDInstructions |
See for details3.1.1(4) |
Shape size |
142mm x138mm x46mm(L x W x H) |
Use environment |
Working temperature:-10ºC reach55ºC |
Working humidity:10% reach 90% RHNon-condensation |
|
Electrostatic protection of the whole machine |
1aContact Discharge2Grade;1bAir Discharge2Level 1; Implementation criteria:IEC61000-4 |
Power Supply and Power Consumption |
DC12V,<10W |